- Our Services
- Events and Training
January 5, 2011
This article addresses the issue of framing non-load bearing doors and windows using the same methods as load bearing walls resulting in extra costs of both time and materials that could potentially be avoided by using alternate construction techniques. Corrective measures are also suggested.
Identify a load bearing header (left) vs. non-load bearing header (right)
Framing non-load bearing doors and windows the same as load bearing walls.
Description of Implementation Error
Extra framing used around non-load bearing windows and doors throughout building.
Incorporating Advanced Framing techniques around the windows would greatly reduce the wood required below the top plate of the upper story, and it’s estimated that between $500 and $750 in material costs could be saved in this example alone had a single beam been used directly under the roof trusses.
Identify non-load bearing walls and use Advanced Framing techniques to reduce the amount of wood required around windows and doors.